Rubber Waterstop with Many Species and Specification

If you are looking for more details, kindly visit our website.

Rubber waterstop is made from natural rubber or synthetic rubber, adding various additives and fillers, through the process of plasticizing, mixing, pressing, forming. It has many species, such as buried rubber waterstop, back stick rubber waterstop, steel edge rubber waterstop, reinforced rubber waterstop, steel butyl putty rubber waterstop, P type rubber waterstop and rubber waterstop intersection. The waterstop has high tensile strength, good waterproof performance, good elasticity, can resistant to rust, wear, aging, tear, corrosion, can arise compression deformation under various loads. It is suitable for dams, reservoirs, subway, culverts, tunnels, sewage treatment plants, water conservation, subways, sluices, etc.

RW-1: Several main rubber waterstops.

Several main rubber waterstops.

RW-2: CB type buried rubber waterstop.

CB type buried rubber waterstop.

RW-3: EP type back stick rubber waterstop with four stems.

EP type back stick rubber waterstop with four stems.

RW-4: A roll of steel edge buried rubber waterstop.

A roll of steel edge buried rubber waterstop.

RW-5: Reinforced rubber waterstop has good waterproof performance.

Reinforced rubber waterstop has good waterproof performance.

RW-6: Steel butyl putty rubber waterstop has good waterproof performance.
RW-7: Hollow P type rubber waterstop is used in sluice.

Hollow P type rubber waterstop is used in sluice.

RW-8: Circle center bulb cross

Circle center bulb cross rubber waterstop intersection

Specification

• Material: rubber.
• Species:
  • Buried rubber waterstop, such as CP type, CB type; 651, 652, 653, etc.
  • Back stick rubber waterstop, such as EP type, EB type.
  • Steel edge rubber waterstop.
  • Reinforced rubber waterstop.
  • Steel butyl putty rubber waterstop.
  • P type rubber waterstop.
  • Rubber waterstop intersection.
• Width (mm): 200, 230, 250, 280, 300, 350, 400, 500.
• Thickness (mm): 6-12 mm.
• Length, width and thickness can be customized.

Rubber Waterstop Properties Number Item Index B S J 1 Hardness (shore A) 60±5 60±5 60±5 2 Tensile Strength (MPa) &#; 15 12 10 3 Elongation at Break % &#; 380 380 380 4 Compression Set 70°C × 24 h % &#; 35 35 35 23°C × 168 h % &#; 20 20 20 5 Tearing Strength KN/m 30 25 25 6 Brittleness Temperature °C &#; -45 -40 -40 7 Hot Air Aging 70°C × 168 h Hardness (shore A) &#; +8 +8 - Tensile Strength (MPa) &#; 12 10 - Elongation at Break % &#; 300 300 - 100°C × 168 h Hardness (shore A) &#; - - +8 Tensile Strength (MPa) &#; - - 9 Elongation at Break % &#; - - 250 8 Ozone aging 50 pphm: 20%, 48 h Grade 2 Grade 2 Grade 0 Note: If there are other requirements, inspection items can be appropriately added according to buyer and seller. If evaluating mold test in line with users, its anti-mold property should be equal to or above Grade 2.

Feature

• High tensile strength, good waterproof performance, good elasticity.
• Rust, wear, aging, tear, corrosion resistance.
• Adapt the deformation of concrete.
• Can arise compression deformation under various loads.
• Capable to withstand hydrostatic pressure.
• Temperature range from -45°C to +60°C.
• Non-toxic, not pollute the environment.
• Can withstand a certain degree of bending and pressure.
• Unequal thickness structure can ensure each part of the sections can get uniform and reasonable force.
• Setting holes ensure the waterstop fix with the nearest steel bar convenient and firmly.
• Easy to install.
• Long service life.

Application
Rubber waterstop is usually used in construction joints, settlement joints, deformation joints and movement joints to prevent water seepage and leakage, absorb shock, ensure the life of projects. It is ideal for portable water tank, water and sewage treatment facility, foundation, basement, subway, dam, canal, water reservoir, aqueduct, tunnel, culvert, parking deck, bridge deck, abutment, elevator pit, roof, floor slab, swimming pool, road embankment, retaining wall, underground facility, stadium, storm drain, etc.

Storage and package
Rubber waterstop should be stored in shade and dry environment, away from sunlight, water, moisture, high temperature, acid, alkali, oil, organic solvent, heat source. The product should be placed vertically, not be pressed by heavy things. The temperature range of storage place should be -10°C to +30°C, relative humidity is in the range of 40% to 80%. Package: 20 m/roll.

Inquiry for Our Product

Hengshui JingTong Rubber Co., Ltd.
:

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.

For more information, please visit Hengyang.

Full Name

*

Address

*

Country Code

*

+ Number

*

Your Website

Message

*

Want more information on Rubber Water Stopper? Feel free to contact us.