# How to Install Plastic White Skirting.
### Step 1: Measure and Cut.
Start by measuring the length of the area where you will be installing the plastic white skirting. Use a tape measure to ensure accuracy. Once you have the measurements, use a saw to cut the plastic skirting to the appropriate length.
### Step 2: Clean the Surface.
Before installing the plastic skirting, make sure the surface is clean and free of any debris or dust. Use a damp cloth to wipe down the area and remove any dirt that may prevent the skirting from adhering properly.
### Step 3: Attach the Skirting.
Next, apply a strong adhesive to the back of the plastic skirting. Make sure to follow the manufacturer's instructions for the adhesive to ensure proper adhesion. Press the skirting firmly against the surface and hold it in place for a few seconds to secure it.
### Step 4: Secure with Screws.
For added stability, you can also use screws to secure the plastic skirting in place. Pre-drill holes along the top edge of the skirting and then insert screws to hold it firmly against the wall. Make sure the screws are evenly spaced and tightened securely.
### Step 5: Caulk the Seams.
To give the installation a finished look, use caulking to fill in any gaps or seams between the skirting and the wall. Smooth out the caulking with a putty knife for a clean and seamless appearance.
### Step 6: Paint (Optional).
If desired, you can paint the plastic white skirting to match the decor of the room. Make sure to use a paint specifically designed for plastic materials and allow sufficient drying time before moving or touching the skirting.
Following these steps will ensure a professional-looking installation of plastic white skirting in your home. This versatile and durable material will not only enhance the aesthetic appeal of your space but also provide protection against moisture and wear.
Want more information on plastic white skirting board, pvc wall panel accessories, yp40? Feel free to contact us.