Check now
An LED strip light is a flexible circuit board that is populated with LEDs that you can stick almost anywhere you want to add powerful lighting in a variety of colors and brightnesses. You can cut the strip every few inches, allowing you to freely design your project without worrying about space requirements LED strip lights are flexible and can be bent vertically up to 90 degrees. This allows you to add light to places previously thought impossible. LEDs can be manufactured to emit a variety of single colors and color changing options. With a thickness of 1/16’’ (2mm), LED strips can be installed in many tight spaces and can easily be hidden from view. The back of the strip is fitted with a strong 3M tape, allowing you to peel and stick lights to many different surfaces. Our LEDs are dimmable and compatible with most home automation and DMX systems, wall dimmers, and remote dimmers. You have complete control over your LEDs. Additional environmental protection can be added to make the strips IP65 or IP68 rated (Dust/water resistant or dust/waterproof ) For more information, please visit BLUE DIAMOND. We are able to customize specialty strips for your project to include custom colors, lengths, CRI, width, voltage, brightness, and more. Contact us! The basics are all the similar. You will need a strip light, a power unit, and a way to attach the two to make your lights turn on. The size and type of power unit will depend on the type of LED strip light, length required, and dimming option required.We are always here to assist in your selection. You can also purchase a complete kit here Installing LED strip lights is simple and can be done in a few steps. Consult an electrician before working with electricity and contact us with any questions throughout the process. Below is an example of an installation we did at a coffee shop.The change from halogen lamps to LED strip lights not only saved energy, but looks much more beautiful. Our design specialists are here every step of the way from design to installation assistance. We treat every project like it is our own and will work with you until your vision is realized.
We offer a variety of support options including:
An LED strip light is typically half an inch (10-12 mm) in width, and up to 16 feet (5 meters) or more in length. They can be cut to specific lengths using just a pair of scissors along the cutlines, located every 1-2 inches.
Individual LEDs are mounted along the strip, typically at densities of 18-36 LEDs per foot (60-120 per meter). The light color and quality of the individual LEDs determine the overall light color and quality of the LED strip.
The backside of the LED strip includes pre-applied double-sided adhesive. Simply peel off the liner, and mount the LED strip to virtually any surface. Because the circuitboard is designed to be flexible, LED strips can be mounted on curved and uneven surfaces.
If you are looking for more details, kindly visit Narrow LED Strip.