Press Room Automation was the first Indian manufacturer to recognize the potential of the new technology of servo-driven press feeding equipment (NC Servo Feeder) in . Press Room Automation has redesigned and simplified its entire Servo Roll Feeder line, employing innovative, new manufacturing techniques to bring you the highest quality, lowest maintenance, most economical servo line ever.
If you are looking for more details, kindly visit our website.
Fast job changeover.
Compact and simple to install.
High production rates.
Servo-driven feed rolls grip and move material rapidly and precisely into a stamping press or automation operation. Press Room Automation includes user-friendly features at no extra chargeâ&#;&#;quick-release handles to adjust roller stock guides, exit support and stock buckle bridge, transition mounting brackets, positive pilot release, and roll release for material insertion via pneumatic cylinder are just a few of our standard features. All Press Room Automation Servo Roll Feeder models have extra-large rolls to withstand the toughest abuse and harshest pressroom environments. Compare our rated specifications and generous roll diameter against any other feed builder.
Features
MECHANICAL
Stabilized Steel frame construction
Gear driven upper Roll with anti-backlash features to ensure non-slip, positive feeding
Quick adjustment for stock thickness
Finished Rolls
Permanently sealed precision Roll Bearings, no lubrication required
Low Inertia Timing Sheaves with reinforced Gear Belt
Roll release Actuation Level that adapts to either Mechanical or Pneumatic Pilot Release
Entry Support Rolls / Cascade Rolls
Individually adjustable Roller stock guides
Roll Release Lever for Strip insertion
Adjustable Mounting Bracket with Transition Plate & Jack Screw for press line adjustment + 50mm
Exit anti-buckle Stock Bridge.
ADDITIONAL FEATURES
Accuracy to ± 0.025mm roll position is achieved through, closed-loop servo control and precision gearing.
When connected to the press control. advanced diagnostic protect machinery and dies by automatically stopping the press if a fault is detected.
On-Screen message displayed in English.
Smoother feeder operations with controlled acceleration profiles.
Up to 99 parts can be pre-programmed by part number, each having unique length, feed rate, acceleration and jerk configuration.
Multiple cycle choices-feed before press, press before feed, or intermittent operations - allow the user to set up the roll feed specific to his needs.
Input Power: 230/ 415V, 3 Phase. No Transformer Required.
SERVO SYSTEM FEATURES
High Performance brushless Servo Drive (From International Source)
Precision incremental optional Encoder (In built) to provide velocity & position loop feed back.
Industrial Hardened Terminal : Easy-to-read solid state Interface Terminal display area with a backlit 4 line display, sealed membrane keypad with tactile feedback.
User Friendly Interface : The Interface Terminal directs the operator with clear, descriptive message in plain English. Pressing the Help key while in different screens directs the operator with instructions on how to change parameters or look at information. Different modes off operation can be selected as well as jogging forward ar reverse in manual mode.
Batch counting : The operator chooses the number of parts to make & the Interface Terminal will display a message when the count is reached. Up to 999,999
Advanced Feed-Angle Monitoring : Continually monitors the feed-angle & the material positions.
Compact electronic control Enclosure with built-in Operation Panel that can be easily adapted for press mounting or used as a freestanding console.
With competitive price and timely delivery, Lihao Machine sincerely hope to be your supplier and partner.
ADDITIONAL FEATURES
Accuracy to + 0.025mm roll position is achieved through, closed-loop servo control & precision gearing.
When connected to the press control, advanced diagnostic protect machinery & dies by automatically stopping the press if a fault is detected.
on-screen message displayed in English.
Smoother feeder operations with controlled acceleration profiles.
Up to 99 parts can be pre-programmed by part number, each having unique length, feed rate, acceleration & jerk configuration.
Multiple cycle choices-feed before press, press before feed, or intermittent operations-allow the user to set up the roll feed specific to his needs.
Input Power : 230 /415V, 3 Phase. No Transformer Required.
ACCESSORIES & OPTIONS
Stock Oiler
Electronic Cam kit : Programmable Rotary Limit Switch for Setting of the Safe Feed and Pilot Release Windows, with digital crank rotation position and Press Speed Indicator consult Factory.
Adjustable Pilot Release Cam Pin for mounting to press ram Pneumatic / mechanical / servo roll release for pilot release. Proximity sensor to initiate feed cycle instead of limit switch
Screw Adjustable Press Mounting Bracket.
Hydraulic Jack Press Mounting Bracket.
Special Roll Finish
Pull-Through Straightener.
Remote Pendant with Forward and Reverse Jog Push Buttons.
Additional measuring wheel on strip for measurement.
Sequential Press feeding to enter no of pitched in a single setting,
Push-Pull Servo Feed Used extensively for Gasket, Foil, Fabric, Teflon and other limp, delicate material.
Both Servo Feeds are synchronized by a single control with proprietary new software. Pushing the material into position and simultaneously pulling the strip or skeleton away from the tool provides better control and eliminates buckling.
The Push-Pull can be manufactured using any model of P/A Feed - from the Micro to the Maximus, even Wire Feeds and Profiled Parts Feeds.
This system can be used for non-coil strip feeding and can increase piece part production by as much as 400% vs. many strip feed applications.
Are you interested in learning more about Feeders, Servo Feeders? Contact us today to secure an expert consultation!