How to Choose Inline Strainer Type Wagner 200 Mesh Export?

How to Choose Inline Strainer Type Wagner 200 Mesh Export?

Choosing the right inline strainer type, specifically the Wagner 200 Mesh Export, involves several key factors. Below are some commonly asked questions that can guide you through the selection process.

1. What is the purpose of an inline strainer?

Inline strainers are used to remove debris, dirt, and other impurities from fluids flowing through pipes. This is essential for protecting downstream equipment such as pumps, valves, and heat exchangers from damage due to blockage or wear.

2. Why choose a 200 Mesh filter?

A 200 Mesh filter is appropriate for applications where you need to capture finer particles. The mesh size indicates how many holes there are per linear inch; a 200 Mesh filter can trap particles as small as 74 microns, making it suitable for many industrial applications where cleanliness of the fluid is critical.

3. What factors should I consider when selecting an inline strainer?

• Fluid Type: The type of fluid (liquid, gas, or slurry) you are working with will determine the materials and design needed.
• Flow Rate: Calculate the flow rate in your system to choose a strainer that can handle the required capacity without creating excessive pressure drops.
• Temperature and Pressure: Ensure the strainer can withstand the maximum temperature and pressure of your system.
• Maintenance: Choose a model that allows for easy cleaning and maintenance to minimize downtime.
• Installation Space: Assess the space available in your piping system to determine the size and type of strainer you can install.

4. How do I install the Wagner 200 Mesh Export inline strainer?

The installation process involves the following steps:

• Turn off the flow in the pipes where the strainer will be installed.
• Position the strainer in line with the fluid flow direction indicated on the device.
• Securely fasten the strainer to the pipe using appropriate fittings.
• Once installed, reopen the flow and check for leaks.

5. How often should I clean or replace the inline strainer?

The frequency of cleaning or replacement depends on the type of fluid, the level of contaminants, and the specific application. Regular inspection is recommended, and you should clean the strainer if you notice a significant pressure drop or reduced flow rate.

6. Can I use the Wagner 200 Mesh strainer for different applications?

Yes, the Wagner 200 Mesh strainer is versatile and can be used in various applications, including water treatments, chemical processing, and petroleum industries. However, always ensure that its specifications meet the requirements for each specific application.

7. Where can I purchase the Wagner 200 Mesh Export inline strainer?

Wagner products can typically be found at industrial supply stores, through online retailers, or directly from the manufacturer. Make sure to source from a reputable dealer to ensure quality and authenticity.