How to Properly Use Chery Tension Pulley: A Step-By-Step Guide.
Chery Tension Pulley is an essential part of your vehicle’s engine system that helps regulate the tension on the serpentine belt. It’s crucial to ensure that it’s in good condition and properly used to avoid engine damage and costly repairs. Here’s a step-by-step guide on using Chery Tension Pulley:
Step 1: Disconnect the Battery.
Disconnecting the battery is a crucial step to ensure that there’s no electrical power running through the engine system that might cause an accident.
Step 2: Locate the Tensioner Pulley.
Find the tensioner pulley located on the side of the engine where the serpentine belt is installed. The tensioner pulley is spring-loaded with a torsion spring that maintains the proper belt tension.
Step 3: Inspect the Tensioner Assembly.
Inspect the tensioner assembly for any signs of wear and tear. Check the assembled pulley wheel for cracks or chips on its teeth, which might damage the belt. Replace any damaged components before proceeding.
Step 4: Release the Tensioner.
Use the proper-sized socket wrench to fit into the square hole located in the tensioner arm. Move the wrench in the direction where the belt is released to release the tensioner pulley.
Step 5: Remove the Belt.
After releasing the tension on the belt, remove it from the pulleys. Check the belt itself for any signs of wear, cracking, or shredding. Replace if necessary.
Step 6: Inspect and Replace the Tensioner Pulley.
Inspect the belt tensioner pulley for any signs of wear, cracks, chips, or deformities on its mounting surface. Replace the pulley if necessary.
Step 7: Install the New Belt.
Route the new belt around the pulleys, leaving the tensioner pulley last. Ensure that the belt is correctly seated on each pulley.
Step 8: Release the Tensioner.
Use the socket wrench again to move the tensioner pulley back into place to tension the belt. Ensure the tensioner remains in position and moves freely.
Step 9: Reconnect the Battery.
Connect the battery back to the engine system.
Step 10: Final Checks.
Start the engine and check the tension of the belt. The belt should not be too tight or too loose. Listen for any abnormal noises from the belt tensioner pulley, and inspect for any visible movement of the tensioner assembly.
Conclusion.
Chery Tension Pulley is an essential component in your engine system. It’s vital to take good care of it, always ensuring that it’s properly installed and maintained. Following these steps will help you avoid costly repairs and ensure that your engine’s belt remains in good working condition.
If you want to learn more, please visit our website dongfeng rear door wholesale, great wall wingle auto spare parts wholesale.