If you are looking for more details, kindly visit Godson Tech.
How to Test Emergency Exit Lights.
Emergency exit lights are essential safety devices that provide illumination during an emergency or power outage. It is important to regularly test these lights to ensure that they will function properly when needed. Follow these step-by-step instructions to test your emergency exit lights:
Step 1: Notify Occupants.
Before testing your emergency exit lights, notify the building occupants. This will prevent them from being alarmed by the activation of the lights.
Step 2: Test the AC Power.
Start by testing the AC power source. Turn off the circuit breaker that controls the emergency exit lights. If the lights are equipped with a battery backup, they should turn on immediately. If they do not turn on, the battery may be dead or malfunctioning.
Step 3: Test the Battery.
If the emergency exit lights do not turn on after the AC power has been turned off, test the battery backup. Use a voltmeter to measure the battery voltage. The battery voltage should be between 13.2 and 14.4 volts. If the voltage is lower, the battery may need to be replaced.
Step 4: Test the Duration.
The emergency exit lights must also be tested for their duration time. This is the amount of time the lights will stay illuminated during a power outage. Test the duration time by turning off the AC power and timing how long the lights remain on. The duration time should be at least 90 minutes.
Step 5: Check for Damage.
While testing the emergency exit lights, check for any damage to the lights or their components. Ensure that the bulbs are not cracked or burned out, the wiring is not damaged, and the protection covers are in place.
Step 6: Record Results.
Record the results of your emergency exit light test. This will provide a record of the tests performed, as well as any issues that were found and repaired. This record will also ensure that the emergency exit lights are tested regularly.
By following these step-by-step instructions, you will be able to test your emergency exit lights and ensure that they will function properly during an emergency or power outage. Regular testing and maintenance are essential for the safety of building occupants and compliance with local safety regulations.
For more information, please visit our website.
If you are looking for more details, kindly visit how to test emergency exit lights.